CLW GHANA VEHICLE RANGE
Verified garbage compactor, hook-lift and food-waste collection vehicles configured for municipal and contractor operations in Ghana.
CONFIGURED TO ORDER
A 12.5-tonne CLW pure-electric food-waste truck with an 8.5 m³ tank, 250 L clean-water tank and 500 L wastewater tank. The source lists a 142.19 kWh lithium-iron-phosphate battery and a 270 km driving range; actual route range must be validated for load, climate and duty cycle.
Review configuration →
CONFIGURED TO ORDER
A JAC 4×2 pure-electric hook-lift truck for municipal container-swap operations. The source supports a 106.9 kWh CATL battery, 11,400 kg GVW, 6,455 kg rated net load and a 12-tonne hook mechanism rating. Container geometry and the final legal operating mass must be confirmed.
Review configuration →
CONFIGURED TO ORDER
A hydraulic swing-arm skip loader for containerized municipal and industrial waste collection. The source supports a 16,200 kg GVW 4×2 platform and a hydraulic lifting system, but does not state a reliable skip volume or chassis brand. Those items must be confirmed before quotation.
Review configuration →
CONFIGURED TO ORDER
A compact Isuzu ELF 100P 4×2 refuse compactor for township, residential and institutional routes. The source supports a 6 m³ sealed body, hydraulic compaction and an independent sewage tank. The final LHD, engine, emissions, axle loads and bin interface must be confirmed for Ghana.
Review configuration →
CONFIGURED TO ORDER
A Dongfeng 4×2 food-waste truck for restaurants, hotels, canteens, markets and municipal organic-waste routes. The source identifies an 8 m³ tank, hydraulic loading, solid-liquid separation and push-out discharge. Bin interface, payload, steering and destination compliance require final configuration confirmation.
Review configuration →
CONFIGURED TO ORDER
A HOWO 4×2 hook-lift truck for detachable-container waste transfer between collection points, transfer stations and disposal sites. The source identifies an 18-tonne GVW platform, 16 m³ container and hydraulic roll-off system. Container interface, axle loads, steering and Ghana compliance require final confirmation.
Review configuration →
CONFIGURED TO ORDER
A higher-capacity HOWO 4×2 rear-loader for municipal routes that need more body volume per trip. The source consistently identifies a 12 m³ compactor body, diesel power and manual transmission. Conflicting payload and overall-length figures were excluded pending a signed engineering specification.
Review configuration →
CONFIGURED TO ORDER
A medium-size JAC rear-loader for municipal and contractor collection routes requiring more body volume than compact models. The source supports an 8 m³ body, 4×2 chassis, diesel power and manual transmission. Conflicting payload values were excluded and must be resolved during engineering review.
Review configuration →
CONFIGURED TO ORDER
A light-duty Dongfeng 4×2 refuse compactor for residential compounds, institutions and narrow collection routes. The source record identifies a 3.5 m³ body, diesel power, manual transmission and a CAN-based control system. Final steering, emission, payload and bin-interface specifications require signed engineering confirmation for Ghana.
Review configuration →
CONFIGURED TO ORDER
A compact 4×2 Foton refuse compactor for residential estates, narrow urban routes and short municipal collection cycles. The verified source configuration combines a 5 m³ body, diesel power and manual transmission. Steering position, emission package and local compliance must be confirmed for the Ghana quotation.
Review configuration →