Vehicles · Direct factory configuration
Dongfeng 8 m³ Food-Waste Truck with Solid-Liquid Separation
A specialized Dongfeng truck for food and organic waste from restaurants, markets, hotels and institutions. The verified 8 m³ tank uses hydraulic loading, solid-liquid separation and push-out discharge. Payload, height, bin interface, steering and destination compliance require final confirmation.
Core capabilities in operation
Capabilities are shown with their operating conditions. Route productivity varies with waste density, stop frequency, access and haul distance.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| 8 m³ enclosed collection | Provides 8 m³ nominal enclosed tank volume. | Usable payload depends on waste density and liquid content. | Waste density, liquid content, payload and axle-load limits. |
| Solid-liquid separation | Separates liquid from solid fractions during collection. | Final separator and drainage arrangement must be specified. | Waste composition, separator design, drainage and cleaning frequency. |
| Push-out discharge | Discharges collected material by hydraulic push-out. | Receiving-site access and discharge procedure must be confirmed. | Receiving-site access, discharge clearance, material consistency and hydraulic condition. |
Technical specifications
| Manufacturer | Chengli Group (CLW) |
|---|---|
| Model | CL5120TCACC6 |
| Chassis brand | Dongfeng |
| Drive layout | 4×2 |
| Fuel type | Diesel |
| Transmission | Manual |
| Emission configuration | Configurable; confirm final engine and destination compliance |
| Capacity | 8 m³ food-waste tank |
Body specifications
| Body Type | Enclosed food-waste collection tank |
|---|---|
| Capacity | 8 m³ |
| Height Note | Source lists 2700/2850 mm depending on configuration; confirm final height |
Working system specifications
| Options | Automated PTO and heated tank are source-listed options; confirm availability |
|---|---|
| Separation | Solid-liquid separation described by source |
| System | Hydraulic loading and push-out discharge |
Configuration options and trade-offs
- Heated tank: May support specific climates or waste streams but adds complexity; source lists it only as an option.
- Solid-liquid separation: Improves controlled handling but requires cleaning and drainage management.
Operating fit
Suitable conditions
- Segregated food and organic waste
- Restaurant and institutional collection
- Routes with a defined receiving or treatment point
Not recommended for
- Unsegregated mixed waste without engineering approval
- Hazardous or chemically incompatible waste
- Operation without a confirmed cleaning and drainage procedure
Frequently asked questions
What tank capacity is verified?
The source identifies an 8 m³ food-waste tank.
Does it separate liquids?
The source describes solid-liquid separation; final separator and drainage details require confirmation.
Can it handle mixed waste?
It is positioned for food and organic waste; mixed-waste suitability requires engineering review.
This Dongfeng food-waste truck is designed for wet organic waste from restaurants, hotels, canteens, markets and residential collection points. Its enclosed tank and solid-liquid separation system are intended to improve controlled handling compared with an open-body truck.
Verified source configuration
- Dongfeng 4×2 chassis
- CL5120TCACC6 vehicle model
- 8 m³ tank
- Diesel power and manual transmission
- Overall length 6,650 mm and width 2,260 mm
- Hydraulic loading and push-out discharge described by the source
- Solid-liquid separation described by the source
The source lists two possible vehicle heights, so height is not presented as one fixed verified value. The listed 5-tonne payload also requires confirmation against the final chassis and legal configuration.
Application fit
Suitable for segregated food and organic waste. It should not be presented as a general mixed-waste compactor without confirming the waste stream, liquid content and unloading process.
Before quotation
Provide daily volume, liquid content, container type, loading height, discharge method, cleaning procedure, route distance, steering requirement and local registration rules.
FAQ
What tank capacity is verified?
The source title and model description identify an 8 m³ tank.
Does it separate liquids?
The source describes solid-liquid separation; the final separator and drainage specification must be confirmed.
Can it handle mixed municipal waste?
This page positions it for food and organic waste. Mixed-waste suitability requires engineering review.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Images Published5
- Images Verified6
- Source Languageen
- Source Product Id50058
- Title Match1
- Vehicle Type Match1
- Verified On2026-09-29