Refuse Compactor Trucks · Direct factory configuration
Shacman 26 m³ Heavy-Duty Refuse Compactor Truck
A source-verified heavy-duty Shacman refuse compactor with a 26 m³ rear-loading body, 25,000 kg GVW and 6×4 chassis. Payload, engine selection, axle loading, steering and Ghana compliance require final engineering confirmation.
Core capabilities in operation
Capabilities are shown with their operating conditions. Route productivity varies with waste density, stop frequency, access and haul distance.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| 26 m³ refuse body | Supports very high-volume collection on suitable routes. | Road geometry, legal payload and disposal access must support the vehicle. | Waste density, axle loads and turning space. |
| 6×4 heavy-duty chassis | Provides a heavy platform for large-body duty. | Final chassis and engine must be selected. | Road surface, gradient and service support. |
Technical specifications
| Manufacturer | Chengli Group (CLW) |
|---|---|
| Model | Shacman Delong 26CBM Compactor Garbage Truck |
| Chassis brand | Shacman |
| Drive layout | 6×4 |
| Fuel type | Diesel |
| Transmission | 6-speed or 8-speed manual option |
| Wheelbase | 4350+1350 / 4500+1350 mm options |
| Gross vehicle weight | 25 000 kg |
| Capacity | 26 m³ refuse body |
Body specifications
| Body Type | Rear-loading refuse compactor |
|---|---|
| Capacity | 26 m³ |
| Compaction Ratio | 1:2.5 source-listed |
| Material | Q235 carbon steel with anti-rust treatment |
Additional chassis specifications
| Engine Options | Yuchai / Cummins |
|---|---|
| Tyres | 11.00-20, 11.00R20, 12R22.5 or 12.00R20 options |
Working system specifications
| Control | Hydraulic + electric + remote |
|---|---|
| Source Loading Time | 20 seconds |
| System | Hydraulic compression |
Safety configuration
- Emergency-stop positions and interlocks
- Camera, lighting and warning devices
- Crew access and body or container locks
Configuration options and trade-offs
- 26 m³ body: Maximizes volume but increases size, weight and route constraints.
Operating fit
Suitable conditions
- Wide high-volume municipal routes
- Industrial parks and transfer operations
Not recommended for
- Narrow residential streets
- Unverified bridge or axle limits
- Sites without adequate manoeuvring space
Frequently asked questions
What capacity is verified?
The source identifies a 26 m³ rear-loading body.
Is the listed payload final?
No. Payload and axle loads must be confirmed for the final configuration and destination.
Shacman 26 m³ Heavy-Duty Refuse Compactor Truck
A source-verified heavy-duty Shacman refuse compactor with a 26 m³ rear-loading body, 25,000 kg GVW and 6×4 chassis. Payload, engine selection, axle loading, steering and Ghana compliance require final engineering confirmation.
Before quotation, confirm the route, waste stream, loading interface, legal axle loads, steering position, emission package and destination documents.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Images Verified6
- Source Product Id50033
- Statussource_verified
- Title Match1
- Vehicle Type Match1
- Verified On2026-09-30