Refuse Compactor Trucks · Direct factory configuration
Dongfeng 8 m³ Food-Waste Collection Truck
A source-verified Dongfeng 4×2 food-waste truck with an 8 m³ tank, solid-liquid separation and push-out discharge. Body material, payload, steering, emissions and Ghana compliance must be fixed in the signed technical schedule.
Core capabilities in operation
Capabilities are shown with their operating conditions. Route productivity varies with waste density, stop frequency, access and haul distance.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| 8 m³ food-waste tank | Collects wet organic waste in a sealed body. | Payload must reflect liquid content and density. | Waste composition, cleaning and drainage. |
| Solid-liquid separation and push-out discharge | Supports controlled unloading and reduced residue. | Final body and cleaning package must be selected. | Material choice, maintenance and discharge procedure. |
Technical specifications
| Manufacturer | Chengli Group (CLW) |
|---|---|
| Model | CL5120TCACC6 Kitchen Waste Truck |
| Chassis brand | Dongfeng EQ1125SJ8CDC |
| Drive layout | 4×2 |
| Engine | Yunnei YN25PLUS160B |
| Fuel type | Diesel |
| Transmission | Manual |
| Wheelbase | 3800 mm |
| Gross vehicle weight | 11 995 kg |
| Capacity | 8 m³ food-waste tank |
| Overall dimensions | 6650 × 2260 × 2850 mm |
Body specifications
| Bin Lifter | 240 L standard bin stated |
|---|---|
| Body Type | Square food-waste tank |
| Capacity | 8 m³ |
| Material | 4 mm carbon steel; stainless steel optional |
Working system specifications
| Controls | Manual; electric optional |
|---|---|
| Pressure | 16 MPa maximum source-listed |
| System | Hydraulic bin lifting and push-out discharge |
Operating performance
| Bin Lift Tip Cycle | ≤25 seconds |
|---|---|
| Bin Lowering | ≤20 seconds |
| Rear Cover Opening | ≤20 seconds |
Safety configuration
- Emergency-stop positions and interlocks
- Camera, lighting and warning devices
- Crew access and body or container locks
Configuration options and trade-offs
- Stainless-steel body option: Improves corrosion resistance but changes cost and must be specified.
Operating fit
Suitable conditions
- Restaurant, hotel and market food waste
- Municipal organic-waste routes
Not recommended for
- Hazardous waste
- Unverified payload limits
- Use without cleaning and drainage procedures
Frequently asked questions
What tank capacity is verified?
The source identifies an 8 m³ effective body volume.
Is stainless steel standard?
No. The source states carbon steel with stainless steel optional.
Dongfeng 8 m³ Food-Waste Collection Truck
A source-verified Dongfeng 4×2 food-waste truck with an 8 m³ tank, solid-liquid separation and push-out discharge. Body material, payload, steering, emissions and Ghana compliance must be fixed in the signed technical schedule.
Before quotation, confirm the route, waste stream, loading interface, legal axle loads, steering position, emission package and destination documents.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Images Verified6
- Source Product Id50058
- Statussource_verified
- Title Match1
- Vehicle Type Match1
- Verified On2026-09-30