Refuse Compactor Trucks · Direct factory configuration
Dongfeng 12 m³ Rear-Loader Refuse Compactor Truck for Ghana
A medium-capacity Dongfeng rear-loader with a source-verified 12 m³ sealed body, 18,000 kg GVW and hydraulic compression. Payload, engine package, steering, emissions and Ghana compliance remain subject to the signed schedule.
Core capabilities in operation
Capabilities are shown with their operating conditions. Route productivity varies with waste density, stop frequency, access and haul distance.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| 12 m³ sealed body | Provides medium-capacity collection for municipal routes. | Payload and axle loads must be checked. | Waste density, moisture and haul distance. |
| 120/240/660 L bin handling | Can be configured around common wheeled bins. | Actual bin drawings must be approved. | Lifter geometry and maximum bin mass. |
Technical specifications
| Manufacturer | Chengli Group (CLW) |
|---|---|
| Model | CLW Dongfeng 12CBM Garbage Compactor Truck |
| Chassis brand | Dongfeng D9 |
| Drive layout | 4×2 |
| Steering position | LHD/RHD configurable; Ghana requirement must be confirmed |
| Engine power | 169 kW |
| Engine | CUMMINGS |
| Fuel type | Diesel |
| Transmission | FAST manual |
| Wheelbase | 3950 mm |
| Gross vehicle weight | 18 000 kg |
| Capacity | 12 m³ refuse body |
| Overall dimensions | 9600 × 2550 × 3200 mm |
Body specifications
| Bin Lifter Compatibility | 120/240/660 L bins stated by source |
|---|---|
| Body Type | Sealed rear-loader refuse compactor |
| Effective Volume | 12 m³ |
Working system specifications
| Discharging Time | Less than 25 seconds |
|---|---|
| Loading Cycle | 15–30 seconds |
| Operation | Electric / manual / remote |
| System | Hydraulic compression and rear loading |
Safety configuration
- Emergency-stop positions and interlocks
- Camera, work lights and warning devices
- Crew steps and handrails
- Tailgate locking and sealing
Configuration options and trade-offs
- 12 m³ body: Balances volume and manoeuvrability but still requires axle-load review.
Operating fit
Suitable conditions
- Municipal and commercial routes
- Residential and industrial-area collection
Not recommended for
- Unverified axle limits
- Narrow routes without turning clearance
- Unconfirmed third-party bins
Frequently asked questions
What body capacity is verified?
The source identifies a 12 m³ effective refuse body.
Which bins are referenced?
The source lists 120 L, 240 L and 660 L bins; drawings remain required.
Municipal route configuration
This 12 m³ Dongfeng rear-loader balances collection volume and two-axle manoeuvrability. Confirm waste density, legal axle loads, route access, bin interface and destination configuration before production.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Images Verified6
- Source Product Id50152
- Title Match1
- Vehicle Type Match1
- Verified On2026-09-30